Milwaukee - phosphate meter MW12

Pocket phosphate meter

Milwaukee's MW12 phosphate photometer allows you to measure the solution you want wherever you are.

Procedure:

1. Turn on the instrument by pressing the button.
2. After all segments are seen, the writing “C 1”, “Add Press” appears and flashes, the instrument is ready.
3. Fill the cuvette with 10 ml of unreacted sample and close the cap.
4. Insert the cuvette into the photometer and close the cap of the meter.
5. Press the button. When the display shows “Add”, “C2” with “Press” flashing the instrument is zeroed.
6. Remove the cuvette, open it and add the contents of a packet of reagent 2720115, close the cap and shake gently for 2 minutes,
7. Put the cuvette back into the instrument.
8. Wait 2 minutes and 30 seconds and press the button, or press and hold the button until the timer is displayed on the LCD.

The instrument directly displays the Phosphate concentration in ppm and switches off automatically after 2 minutes.

Specifications

Product list Milwaukee