3-Stage Water Purifier with Activated Carbon Filters

3-stage water purifier for drinking water

The 3-Stage Water Purifier is a filtration system comprising three cartridges designed to trap sediment, rust and suspended particles, helping to reduce residual chlorine, odours and certain organic substances present in the water. It uses a 5-micron polypropylene mechanical filter, followed by two stages of filtration using granular and compressed activated carbon. It can be used as a pre-filtration system for mains water intended for irrigation, gardening and other compatible applications.

Three stages of filtration for sediment, chlorine and impurities

The first stage retains solid particles larger than 5 microns, whilst the second stage uses granular activated carbon derived from coconut shells to reduce certain impurities and organic substances. The third stage, consisting of compressed activated carbon, completes the treatment by helping to reduce residual chlorine and odours. The water purifier is not a reverse osmosis system: it does not contain osmotic membranes and is not designed to remove dissolved mineral salts or significantly lower the electrical conductivity (EC) of the water.

• Number of filters: 3
• First stage: 5-micron polypropylene (PP) sediment filter
• Second stage: granular coconut-shell activated carbon filter
• Third stage: compressed activated carbon filter
• EC reduction: not significant;
• Water temperature: 5–45°C
• Rated flow rate: 1500 L/h
• Weight: 5 kg
• Package dimensions: 43 x 14 x 35 cm
• Sediment filter replacement: every 2–3 months
• Granular carbon filter replacement: every 3–6 months
• Compressed carbon filter replacement: every 3–6 months
• Fittings: not included