Automatic Ph Unit Control and dosing pump
Control the pH of your tank/reservoir AUTOMATICALLY!
The MC122 pH controller and dosing pump (MP810) provides fully automated pH control of aqueous solutions in hydroponic systems. It has been specifically designed to control the pH in mixing tanks for fertilization. The small and precise flow of the peristaltic pump allows you to maintain ideal pH values in your tank.
After selecting the desired pH setting from 5.5 to 9.5 pH, the pH controller measures the pH value of the solution and automatically adds pH adjustment (acid or alkaline) to change the liquid’s pH to the selected level.
Milwaukee MC720 automatic pH controller unit
The Milwaukee MC720 pH controller unit we supply including an automatic dosing pump set. This very complete system, you will not have to worry about the pH levels of your water.
Set the desired pH value (range and 5.5 9.5) via the included controller with display and the system automatically creates the dose of your pH + or pH buffer solution.
Its use is very simple, taking a programming and manual calibration (with roulette of adjustment).
The set consists of the MC122 pH controller including dosing.
Specifications MC122 pH controller:
- Range: up to pH 0.0 14.0;
- Resolution: 0.1 pH;
- Accuracy: + / - pH 0.2 25 ° C;
- Controll Value: pH to 5.5 9.5;
- Metering pump output: Active when the pH value is above or below the controll value;
- Power Connection: 2A -> 115v 60 Hz / 1A -> 230v 50 Hz;
- pH electrode: MA911B / 2;
- Environment Climate: 0 50 ° C to ° C / 0 to 95% RH;
- Power supply: DC 12V;
- Dimensions: x 148.5 82.5 32 x mm;
- Weight: 180 gram.
Specifications dosing pump:
- Dosing: 1.5 L / h (25 cc per minute);
- Maximum pressure: 1 bar;
- Housing material: Polipropileen (PP);
- Discharge pipe material: Santoprene;
- Nutrition: 220V + / - 10%.
Recensioni per Milwaukee MC122 pH controller + dosing pump (MP810)
- Overall opinion
- Product quality
- Easy to use
- Expected results
Ogni utente può scrivere una recensione. Add your review.