The DimLux Maxi Controller can control 160 DimLuxes at the same time. A switchboard, delay unit and relay are no longer needed, the DimLuxes can be plugged directly into the socket.
Just set the on / off time and the set is ready to run. You can set the desired brightness using the + and - keys.
The Maxi Controller can also work with asynchronous times, for example 10 hours on and 10 hours off; this setting reduces the process by almost 20%!
Even sunrise and sunset can be simulated. DimLux Maxi Controller EVO. It is supplied as standard with a 5 meter interlink cable. It can also be supplied with an extra 10 meter long Interlink cable.
This 10 meter cable must be ordered separately, see the following product: DimLux connection cable for DimLux
The use of one or more Dimlux Expert series in combination with the Maxi Dimlux controller has several advantages:
Complete and accurate settings
In addition to 7 dimmer options, the Dimlux Maxi Controller can adjust the light output to the room temperature.
This also facilitates the transition from gradual dimming to continuous variable dimming and thus making it even easier to achieve perfect light setting.
This is possible by pressing the + and - (brightness) buttons or to set the desired temperature and leave the rest at the DimLux Maxi Controller.
When the preset temperature is exceeded, the lights turn off automatically or are also partially disabled. It does not become easier!
Sensors: Measurement = Knowledge
Several sensors are available that can be connected to the DimLux Maxi Controller. A temperature sensor and a humidity sensor can be combined with a temperature sensor for optimal crop growth.
The values obtained from the temperature sensor, the humidity sensor and the system temperature sensor are then analyzed and combined to obtain the optimal ratio between temperature, humidity,
system temperature and therefore the steam pressure deficit.
Wide possibilities for connection and control
A single DimLux Maxi controller can control up to 160 DimLux Expert series (40 pairs).
Two DimLux Expert Series lighting systems can be connected directly to a DimLux Maxi controller via a speaker cable, multiple lighting systems must be connected linearly (to chain) to the first two lighting systems.
In addition, the DimLux lighting systems and the DimLux Maxi Controller can be connected directly to the wall without using relays, timing devices and timers. This is safer and also saves costs.
Simulation of sunrise and sunset
Plants do not use photosynthesis until a certain temperature is reached, when the lights come on after a dark period, this can be stressful and can affect growth, and condensation may form which can cause rot.
This can be prevented by the DimLux Maxi Controller by slowly switching on and off the DimLux Expert lighting systems and simulating the sunrise and sunset.
Energy and cost savings
If a DimLux lighting system is connected to a Maxi DimLux controller, this ballast is the only reactor-free reactor.
A typical starting current ranges from 50 to 160 amps per digital reactor.
The new digital ballasts are equipped with soft start technology so that the inrush current is limited to 50-60 amperes.
This seems little but when it is multiplied by the number of reactors (160 for example), this provides a significant amount of energy savings.
Recensioni per Dimlux - Maxi Controller 1.2
- Overall opinion
- Product quality
- Easy to use
- Expected results
Ogni utente può scrivere una recensione. Add your review.